Download PDF· Rev 1.0.0
Catalogue
Spare Parts and Accessories
Orderable Parts by Product
Accessories for AERL Products
CatalogueRev 1.0.0, 8 Nov 2026
Download PDF· Rev 1.0.0
Catalogue
Contents
- About This Catalogue301CoolMax Solar Charge Controllers3CoolMax SRX: Battery Sense3CoolMax SRX-R: Rack Shelf402CoolPro Cathodic Protection5Surge Buster503Monitoring6HMI-10 Touchscreen604LiFe² Battery6Battery Cabinets6Cables and Connectors7Supplied With Each Battery Module8Parts You Supply805Kakadu 120 Battery8Combiner Box8Supplied With Each Cabinet906Ordering and Support10How to Order10Warranty10Change Log10Thank You for Choosing AERL10
Document
About This Catalogue
This catalogue lists the accessories and spare parts AERL sells for its products, with the part number to order and what each part is for. Prices are in the current AERL price list.
To order, contact AERL sales on 1800 950 865 or [email protected], or your AERL reseller, and quote the part number.
If you need a part that is not listed here, contact AERL.
| Product | Orderable parts |
|---|---|
| CoolMax SRX | Battery Sense |
| CoolMax SRX-R | SRX-R rack shelf |
| CoolPro | Surge Buster |
| AERL Cloud monitoring | HMI-10 touchscreen |
| LiFe² 5120S | Cabinets, cable kit, connector pack |
| Kakadu 120 | Combiner box |
CoolMax Solar Charge ControllersCoolMax SRX: Battery Sense, CoolMax SRX-R: rack shelf
1.1CoolMax SRX: Battery Sense
| Part number | Description | What it is for |
|---|---|---|
| BAT-SENSE | CoolMax Battery Sense: remote temperature and voltage sensor | Measures battery temperature and voltage at the battery, so the CoolMax SRX can compensate its charging for temperature and monitor the battery more accurately. |
The Battery Sense connects to one of the CoolMax SRX's CAN bus RJ45 ports with a CAT6 cable of up to 10 metres, and is powered by the controller: it needs no separate supply. See the Battery Sense User Manual.
1.2CoolMax SRX-R: Rack Shelf
| Part number | Description | What it is for |
|---|---|---|
| SRX-R-RACK-SHELF | CoolMax SRX-R rack shelf: 2U shelf and backplane for two modules | Holds two SRX-R modules side by side and carries their power connections on its backplane. Every SRX-R installation needs a shelf. |
Mount the shelf horizontally in a ventilated, lockable IP5X cabinet, as the SRX-R User Manual describes.
CoolPro Cathodic ProtectionSurge Buster
2.1Surge Buster
| Part number | Description | What it is for |
|---|---|---|
| SURGE-BUSTER | CoolPro Surge Buster: 50 kA / 500 J lightning protection module | Adds surge protection to the CoolPro's input, output and local cabinet earth, and protects the interrupt control and reference cell connections. |
Lightning-prone applications
The Surge Buster is required in lightning-prone applications: pipelines or structures longer than 100 metres or higher than 10 metres. Lightning damage to a CoolPro installed in such an application without one is not covered by the warranty. Elsewhere the Surge Buster is optional.
MonitoringHMI-10 touchscreen
3.1HMI-10 Touchscreen
| Part number | Description | What it is for |
|---|---|---|
| NEXUS-HMI-10 | AERL Industrial HMI (HMI-10): 10.1″ sunlight-readable touchscreen | Gives operators a local view of the live inverter and generator values, faults and alarms at the installation. Panel or rear mount. |
See the HMI-10 Datasheet for its power supply, connections and mounting.
LiFe² BatteryBattery cabinets, cables and connectors
4.1Battery Cabinets
AERL's pre-wired cabinets are the recommended way to install LiFe² 5120S battery modules. Each comes pre-wired with quick connectors and 4 AWG UL cable.
| Part number | Description | What it is for |
|---|---|---|
| LIFE2-CAB6 | LiFe² 6-way cabinet | Up to 6 modules (30.72 kWh), indoor (IP20) |
| LIFE2-CAB10 | LiFe² 10-way cabinet | Up to 10 modules (51.20 kWh), indoor (IP20) |
| Part number | Description | What it is for |
|---|---|---|
| LIFE2-CAB4-OUTD | LiFe² 4-way outdoor cabinet | Up to 4 modules (20.48 kWh), outdoor (IP55) |
| LIFE2-CAB6-OUTD | LiFe² 6-way outdoor cabinet | Up to 6 modules (30.72 kWh), outdoor (IP55) |
| LIFE2-CAB10-OUTD | LiFe² 10-way outdoor cabinet | Up to 10 modules (51.20 kWh), outdoor (IP55) |
Dimensions, weights and busbar ratings are in the LiFe² 5120S Installation and Operation Manual.
4.2Cables and Connectors
| Part number | Description | What it is for |
|---|---|---|
| LIFE2-CABLE-KIT | LiFe² 2 m cable kit: 4 AWG battery cables, 2 m | Battery power cables for LiFe² 5120S modules |
| LIFE2-CONN | LiFe² connector pack: 4 sets of positive and negative battery connectors | Battery power connectors for LiFe² 5120S power cables |
Contact AERL to confirm the right parts for your installation.
4.3Supplied With Each Battery Module
Each LiFe² 5120S module comes with the parts to install it in a LiFe² pre-wired cabinet. They are not sold separately: contact AERL if one is missing or damaged.
| # | Part | Qty |
|---|---|---|
| 1 | Termination plug | 1 |
| 2 | Comms cable | 1 |
| 3 | M6 × 16 bolt | 4 |
4.4Parts You Supply
These are sourced locally by the installer (LiFe² 5120S Installation and Operation Manual, §5.5):
- inverter DC cables, sized for the current of the connected PCE or load, with SCxxx-10 terminals (LiFe²-CAB6) or SCxxx-12 terminals (LiFe²-CAB10); for the outdoor cabinets, contact AERL
- a cabinet PE cable of at least 25 mm², with an SC35-6 terminal
- a shielded communication cable (Cat 5 or higher), only if the inverter supports Managed (communication) mode. For a Victron GX device, use Victron's VE.Can to CAN-bus BMS Type A cable (LiFe² Managed Battery Integration Guide).
Kakadu 120 BatteryCombiner box, supplied with each cabinet
5.1Combiner Box
| Part number | Description | What it is for |
|---|---|---|
| KAKADU-COMB | Kakadu combiner box: 8 × 150 A inputs, 3 × 250 A outputs | Parallels the DC outputs of up to four Kakadu 120 cabinets (eight BMS) to the inverters |
Contact AERL to size the combiner and cables for your system.
5.2Supplied With Each Cabinet
The Kakadu 120 cabinet ships with an accessories box. Check it against this list before you start the installation; contact AERL if a part is missing or damaged.
| Item | Length | Qty |
|---|---|---|
| Battery-to-BMS positive series power cable | — | 2 |
| Battery-to-BMS negative series power cable | — | 2 |
| Battery series power cable A | 250 mm | 4 |
| Battery series power cable B | 280 mm | 2 |
| Battery communication cable A | 250 mm | 4 |
| Battery communication cable B | 400 mm | 2 |
| BMS communication cable | 280 mm | 2 |
| Terminating resistor | — | 2 |
| Positive connector | — | 2 |
| Negative connector | — | 2 |
| Washer bolt | — | 40 |
Ordering and SupportHow to order, warranty, change log
6.1How to Order
Contact AERL sales on 1800 950 865 or [email protected], or your AERL reseller, with the part number and quantity. For a part needed under warranty, contact AERL support on [email protected] instead: see the AERL Warranty Claims and Returns Guide.
6.2Warranty
The warranty on each accessory is in the AERL Warranty Guide and the product's Warranty Statement, at aerl.com.au.
6.3Change Log
| Revision | Date | Change |
|---|---|---|
| 1.0.0 | 11 / 2026 | First issue. |
Thank You for Choosing AERL
If you need a part that is not in this catalogue, contact AERL.
Sincerely,
The AERL Team
AERL Pty Ltd · 1/75 Bluestone Circuit, Seventeen Mile Rocks QLD 4073 · 1800 950 865 · [email protected] · aerl.com.au
Notes
Australian Energy Research Laboratories
Address
1/75 Bluestone Circuit
Seventeen Mile Rocks QLD 4073
Australia
aerl.com.au
Phone1800 950 865