The CoolMax SRX HV 300 is an MPPT solar charge controller for 120 V DC-coupled battery systems. It is no longer manufactured; this datasheet is re-issued for installed systems. For a new system, see the CoolMax SRX 600/30-120. Where two values are given, they are for the SRX HV 300/30 and SRX HV 300/40, in that order.
General
Weight
6.8 kg
Dimensions (W × H × D)
226 × 480 × 111 mm
Enclosure
Indoor Type 1 / IP20
Mounting
Wall, 8 × M5
I/O power connectors
Screw 8–42 mm²
Communications
RS485 (Modbus RTU) / CAN
Communications ports
RJ45 / USB Mini-B
Max conversion efficiency
98.7%
Self-consumption @ idle
100 mA at 20 V
Warranty
3 yr · 5 yr registered
Battery (output)
Nominal battery voltage
120 V
Battery voltage range
90–170 Vdc
Max charge current
30 A / 40 A
Nominal PV power @ 144 V absorb
4320 W / 5760 W
Charging method
3-stage (absorb, float, rebulk)
Temp. compensation
Yes (SRX-RTS sensor)
PV input
Max PV open-circuit voltage
300 V at lowest temperature
Max PV short-circuit current
25 A / 35 A
Min PV MPP voltage
1.3 × nominal battery voltage
PV array oversizing
Up to 140%
Startup voltage
40 Vdc
Overload behaviour
Operating point shift (power limitation)
Environment
Operating temperature
−20 to 60 °C
Storage temperature
−30 to 70 °C
Cabinet air exchange (40 °C intake)
18 / 20 m³/hour
Heatsink rise at full power
30 / 35 °C
Sealed inductors, conformal coating
Yes
Options
Ground fault detection (floating)
EarthGuard EG-600
Remote temperature sensor
SRX-RTS (3–10 m)
High input voltage for easier installation
PV array oversizing up to 140%
Reverse polarity & current protection
Built-in overload & thermal protection
Master/slave operation
Touch-screen configuration
Multi-stage battery charging
Australian engineered
Engineered and supplied by
Australian Energy Research Laboratories 1/75 Bluestone Circuit, Seventeen Mile Rocks QLD 4073