Download PDF· Rev 2.0.1
EarthGuard Datasheet
EG‑600‑SC
Single‑Channel Insulation Monitor
600VdcMax HV input
1channelSingle circuit
30→ 100 kΩTrip thresholds
IP20Indoor Type 1
Download PDF· Rev 2.0.1
EarthGuard Datasheet
Specifications
EG-600-SC · AER12-SCThe EarthGuard EG-600-SC continuously monitors the insulation to earth of one DC circuit (40–600 Vdc). On a fault it lights the Fault LED, sounds the buzzer and opens its fail-safe relay. It is designed to support compliance with AS/NZS 5033 (PV arrays) and AS/NZS 5139 (battery systems) when installed to the current editions of those and other applicable local standards.
General
- Weight
- 250 g
- Dimensions (W × H × D)
- 155 × 100 × 35 mm
- Enclosure
- Indoor Type 1 / IP20
- Operating temp.
- −25 to 60 °C
- Storage temp.
- −25 to 80 °C
- Connection terminals
- Lever push-in · 0.2–10 mm² (22–8 AWG)
Low-voltage side
- Input voltage
- 12–60 Vdc
- Max power consumption
- 2 W
- BATT/PSU jumper
- Fit for 12–15 Vdc
- Alarm relay
- 1 × signal · dry contact, NO, fail‑safe
- Communications
- USB-C
High-voltage side
- Voltage range
- 40–600 Vdc
- Channels
- 1
- Trip thresholds
- 30 / 50 / 100 kΩ
- Default sensitivity
- Low (30 kΩ)
- Isolation to LV
- 4 kV transient
Single-channel simplicity
One monitored circuit, for integration with third-party controllers and PCE.
Field-tunable
Three trip thresholds adjustable over USB-C with AERL Link.
Audio · visual · relay
Onboard buzzer, Fault LED and fail-safe dry-contact relay (open on fault) for remote monitors.
Standards-aligned
Designed to support AS/NZS 5033 and AS/NZS 5139 detection rules.
Manufactured by
Australian Energy Research Laboratories
1/75 Bluestone Circuit, Seventeen Mile Rocks QLD 4073
Designed to meet
AS/NZS 3100:2017AS/NZS 61000.6.3:2012
Contact
[email protected]
aerl.com.au